-17%
PLC Programming Cable Suitable for Mitsubishi FX Series | USB-SC09-FX | Mitsubishi Electric
Original price was: ₨3,500.00.₨2,750.00Current price is: ₨2,750.00.
PIC ICD2 Universal Programming Adapter/Socket | Programmer Board | PICKit2 PICKIT3
Original price was: ₨500.00.₨450.00Current price is: ₨450.00.
TQFP44 to DIP40 Adpater for AVR ISP Interface IC adapter Programmer Socket- CNV-QFP-MPU51
Original price was: ₨3,000.00.₨2,500.00Current price is: ₨2,500.00.
- Top Quality LQFP44 TQFP44 to DIP40 adapter
- QFP44 Adpater Test block for AVR ISP Interface IC adapter Programmer socket
Description
Product Description:
- The imported seat has a longer service life, suitable for all TQFP44 chip.
- applicable models and programmer. Such as ALL-100GANG, ALL-11 series, LT-48 series, SuperPRO series, TOP series, all the programmer.
- Support chip: ATmega16. ATmega32. ATmega8535. ATmega16A. ATmega32A. ATmeag164P. ATmega324P. ATmeag644P. ATmega1284P Etc.
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
AVR ISP Downloader / Download Line / Programmer Support Studio 4/5/6/7 / Compatible with Original STK500
Programmer Introduction:
This programmer independently develops hardware and firmware, which perfectly supports the newly developed latest AVR studio 7; AVR studio 6.2, and V5.0 integrated development environment. It also supports the ultimate version of AVR Studio V4.19 original architecture. The AVR Studio4 series is the version most familiar to engineers who have used AVR chips in the early days. The supported chips are more comprehensive, but the update was officially stopped after V4.19 was launched in September 2011.
PICKit 3 Programmer-Debugger (Authentic Original)
The MPLAB PICkit 3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer’s PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE).
PICKit 3 Programmer-Debugger (Made-in-China)
The MPLAB PICkit 3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer’s PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE).
ST-LINK/V2(CN) in-circuit debugger / programmer for STM8 and STM32
Summary:
The ST-LINK / V2 is an in-circuit debugger and programmer for the STM8 and STM32 families of microcontrollers. The Single Wire Interface Module (SWIM) and JTAG / Serial Wire Debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller found on an application board.
STM8 applications use the full speed USB interface to communicate with STMicroelectronics ST Visual Developed Software (STVD) or STMicroelectronics Visual ST Program (STVP).
STM32 applications use the full speed USB interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.
TI XDS110 Debug Probe | Embedded Development Tool | TMDSEMU110-U
FEATURES:
- Basic debug communications to the target system: IEEE 1149.1 (JTAG), IEEE 1149.7 (cJTAG), Arm serial wire debug (SWD)
- Enhanced and auxiliary debug communications: Support for trace capture through Arm serial wire output (SWO) – UART mode only, Support for UART communications to and from the target system, Support for GPIO channels
- Target I/O voltage support from 1.8V to 3.6V
- Power profiling features: Support for TI EnergyTrace
- Host communications: USB 2.0 high-speed (HS) communication link to the debug host system, Probe power through USB 5V supply
- Expansion: A 30-pin expansion interface that can support a wide array of auxiliary functions
- Target power can be supplied from the probe
XGecu TL866II Plus USB (Universal) Programmer for 15000+IC SPI Flash NAND EEPROM MCU PIC AVR+10 Adapter+IC Puller+ Component Storage box
XGecu TL866II Plus USB High Performance Programmer:
Well-designed cheap professional programmer, Production of high-density SMD technology, a unified user interface, easy to use, fully functional, reliable program running of application software, ultra-small code -runs faster, supports bilingual(English and Chinese), it can automatically identify the operating system to install and run under WIN 2000/WIN XP/WIN 2003/WIN 2008/WIN VISTA /WIN7/WIN8/WIN10 (32BIit/64Bit)
Reviews
There are no reviews yet.