-21%
UT-6601H | 1-Port Ethernet to Serial Converter, TCP/IP to RS-232/422/485 Serial Device Server
Original price was: ₨23,500.00.₨20,500.00Current price is: ₨20,500.00.
TQFP44 to DIP40 Adpater for AVR ISP Interface IC adapter Programmer Socket- CNV-QFP-MPU51
Original price was: ₨3,000.00.₨2,500.00Current price is: ₨2,500.00.
PLC Programming Cable Suitable for Mitsubishi FX Series | USB-SC09-FX | Mitsubishi Electric
Original price was: ₨3,500.00.₨2,750.00Current price is: ₨2,750.00.
Introduction:
- Manufacturer: Mitsubishi Electric
- Product No. : USB-SC09-FX
- Product type: PLC Programming Cable
- USB-SC09-FX PLC Programming Cable
- For Mitsubishi MELSEC SC-09 SC09 FX
- USB Cable for connecting 8 pin connector of Mitsubishi MELSEC FX series, FX0 FX0N FX1N FX2N FX3U FX3G FX2NC FX0S FX1S
6 in stock
Description
Description:
USB-SC09-FX PLC Programming Cable Features:
- PLC cable USB-SC09-FX gold plate Interference Upgrade windows 7
- Compatible with Windows2000/Windows XP / Windows Vista / Windows 7
(Not compatible with WinNT4/95/98/Me/DOS) - Programming software: GX Developer V7.0, GX Works2
- Compatible with: USB V1.1 and USB V2.0
- USB power supply, Current 50mA
- Baud rate: 300bps ~1Mbps
- Length:2.6 meter
- Color: yellow
- Support: UART data format. data bit:7 and 8; stop bit:1 and 2; parity bit: odd/even/no parity
- Working temperature: -20°C ~ +75°C
Additional information
| Weight | 0.2 kg |
|---|---|
| Dimensions | 15 × 14 × 5 cm |
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
CH340G USB to TTL Converter (Upgraded)
Product Introduction:
- This is a USB 2.0 to TTL UART CH340/CH340G Module Serial Converter.
- Designed to be used for USB to TTL
- Built-in USB to RS232 Transfer chip.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 5pin connector.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40degree to +85degree.
- Supports Windows 98SE, 2000, XP, Vista, Window7,8,10 Mac OS 9, Mac OS X Linux 2.40.
CH340G USB To TTL(Serial) Converter For HMI LCD / Raspberry Pi/ Arduino Nano
Product Introduction:
Majors:
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- LED status.
- Dual 3.3V and 5V power output, work with 3.3v and 5v target devices.
- Size: 55mm * 16mm
- Support 32-bit / 64-bit WINDOWS 98 / ME / 2000 / XP / Server 2003 / VISTA / 2008 / Win7 / Win8 server.
- 3 V3 and 5V by short circuit risk selection.
- CH340 module / TTL USB switch / RS232 USB transfer / over PL2303 / STC downloader / 9 Brush board STC official download chip. Perfectly compatible with all series MCU STC will not be because of the different drivers which would cause problems like PL2303 can not download the program.
- Ultra-stable.
Industrial Grade UTEK UT-8801 USB to RS-232 Converter Ver 2.0(1-port USB to RS-232 Serial Converter with ESD protection)
Product Introduction:
-
Allows to connect RS232 device to your computer by USB port.
-
FTDI FT232 + 213 chip
-
All 9-wires out
- Real USB 2.0 specification is compliant for faster and steadier data communication.
-
USB bus-powered and no need external power required.
-
Supports Windows 98SE, ME, 2000, XP, Vista, Windows 7, Win 10, Linux v5.0 or above & Mac OS 8.6 or above.
-
cable length 1.5m
RASPBERRY Pi Zero Camera Cable
The Raspberry Pi Zero and Zero W are both equipped with a smaller CSI (Camera Serial Interface) port than on a full-sized Raspberry Pi board — luckily, that’s where this cable can help! The Raspberry Pi Zero Camera Cable replaces the pre-existing camera module cable, allowing your Zero or Zero W light and imaging capabilities.
This cable measures 15cm from end to end and can easily be swapped in and out.
UTEK UT-732i- Commercial Grade PCI to 2-Port RS485 High-Speed Serial Card Opto-Isolated Computer Serial Expansion Card (with 2 Serial Cable 9-pin Com Ports)
Introduction:
- Connector: DR44 female x1
- BUS: 32 bits universal PCI
- Signal: RS-422：T/R+, T/R-, RXD+, RXD-, GND
RS-485：Data+(A) Data-(B) GND
- Transmission rate: 300bps-921.6Kbps
- Data bits: 5, 6, 7, 8
- Stop bits: 1, 1.5, 2
- Check bits: None, Even, Odd, Space, Mark
- Flow control: RTS/CTS XON/XOFF
- Operating temperature: -40℃～85℃
- Optical isolation: 2,500Vrms isolated voltage, 500DC continuous specialized DC/DC module
- Interface protection: RS-422 & RS-485 provides with 2KV lightning surge, ±15KV ESD protection
- Transmission distance: 1.2km for RS-485/422
- System: Win98/2000、WinXP/2003/Vista/2008/7/8/8.132/64, DOS/Linux 2.4/2.6
UTEK UT-882 (1 port USB 2.0 to RS-232 Converter High Speed USB 2.0 to Serial RS-232 DB-9 Converter) – Supports Windows 8, 7, Vista, XP, 2000, 98, Server 2003, os9 Linux and Mac
Product Review:
UT-882 converter allows you to build a reliable connection by converting RS-232 to USB. The design makes you convenient to connect your cell phone, digital camera, ISDN-TA, Modem with a 1Mbps transmission rate.
UT-882 USB to RS-232 converter provides a reliable connection for point to point communication, with baud rate 300 - 460,800bps. The power and data flow indicators indicate the working status.
Reviews
There are no reviews yet.