Showing 1–12 of 18 results

Acrylic Housing for Arduino UNO R3 CH340G

Original price was: ₨250.00.Current price is: ₨220.00.
Arduino UNO R3 Acrylic Housing

ARDUINO A000073 (UNO SMD REV3, ATmega328 MCU)

Features of the Arduino UNO

- ATmega 16U2 programmed as a USB to serial converter - 14 digital I/O pins (6 can be used as Pulse Width Modulation (PWM) Outputs) - 6 analog inputs - 16 MHz ceramic resonator - USB connection - Power jack - ICSP header - Reset button

Arduino DUE R3 Board SAM3X8E 32-bit Cortex-M3 Control Board Module

Overview:

Arduino Due Microcontroller Board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button

 

 

ARDUINO GEMMA WearAble ATtiny85 Board

Arduino Gemma is a miniature wearable microcontroller board based on the ATtiny85. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a battery to get started on your wearable projects!

Arduino Leonardo, ATmega32U4, USB

Specifications

  • Microcontroller: ATmega32u4
  • Operating Voltage: 5V
  • Input Voltage: 7-12V (recommended)
  • Digital I/O Pins: 20
  • PWM Channels: 7
  • Analog Input Channels: 12
  • DC Current per I/O Pin: 40 mA
  • Flash Memory: 32 KB (ATmega32u4) of which 4 KB is used for the bootloader
  • SRAM: 2.5 KB (ATmega32u4)
  • EEPROM: 1 KB (ATmega32u4)
  • Clock Speed: 16 MHz

Arduino M0 Pro – ATSAMD21G18 Controller

The Arduino M0 Pro is an Arduino M0 with a step-by-step debugger
 
  • 1.Micro Controllerļ¼šATSAMD21G18,48pins LQFP
  • 2.Working Voltageļ¼š3.3V
  • 3.Digtal I/O Pinļ¼š14,12 Piece PWM and UART
  • 4.Analog Input Pinļ¼š6,12-status ADC channels
  • 5.Analog Output Pinļ¼š1,10-status DAC
  • 6.Each I/O Pin's Direct Currentļ¼š7 mA
  • 7.Flash Memoryļ¼š256 KB
  • 8.SRAMļ¼š32 KB
  • 9.EEPROMļ¼šThrough Simulation Highest is 16KB
  • 10.Clock Speadļ¼š48 MHz
  • 11.L*Wļ¼š2.7*2.1 inches
  • 12.External Powerļ¼š5V1A~2A
  • 13.Weight:70g

Arduino MEGA 2560 R3 (ATMEGA2560-16AU MCU)

Original price was: ₨4,000.00.Current price is: ₨3,350.00.

Overview

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.

Arduino Nano V3.0 CH340 Improved Atmega328P USB to TTL with USB cable

Original price was: ₨1,500.00.Current price is: ₨900.00.

Overview:

  • Microcontroller: Atmega328
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Digital I/O Pins 14 (of which 6 provide PWM output)
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory:32 KB (ATmega328) of which 0.5 KB used by bootloader
  • SRAM:2 KB (ATmega328)
  • EEPROM:1 KB (ATmega328)
  • Clock Speed:16 MHz
 

Arduino Pro Mini – 3.3V/8MHz, 5V/16MHz (ATMEGA328)

Original price was: ₨1,600.00.Current price is: ₨1,470.00.

Features: 

ā€¢ ATmega328 running at 8MHz with external resonator (0.5% tolerance)  ā€¢ Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)  ā€¢ USB connection off board  ā€¢ Supports auto-reset  ā€¢ 3.3V regulator  ā€¢ Reverse polarity protected  ā€¢ DC input 3.3V up to 12V  ā€¢ On board Power and Status LEDs 

Arduino Pro Mini Atmega168 (3.3V/ 8MHz, 5V/16MHz)

Features:

  • 14 Digital input / output ports RX, TX D13, D12
  • 8 analog input port A0 to A7
  • The TTL level serial transceiver port RX / TX
  • 4.6 PWM ports, D3,, D5 , D6, D9, D10, D11
  • Using Atmel Atmega168P microcontroller
  • Supports serial download (TTL)
  • Support for external 5V ~ 12V DC power supply
  • Support 9V battery-powered
  • clock frequency 16MHz

Package includes:

  • 1x Arduino Pro mini Atmega168 module board
  • 3x header pin rows

Arduino UNO R3 ATmega328P CH340G Development Board (SMD)

Original price was: ₨2,150.00.Current price is: ₨1,850.00.

Features:

  • ATmega328 microcontroller
  • Input voltage - 7-12V
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • 32k Flash Memory
  • 16Mhz Clock Speed

Arduino UNO R3 with USB cable (ATMEGA 328P)

Original price was: ₨2,500.00.Current price is: ₨2,050.00.

Specifications:

Microcontroller                                     ATmega328
Operating Voltage                                 5V
Input Voltage (recommended)          7-12V
Input Voltage (limits)                          6-20V
Digital I/O Pins                                    14 (of which 6 provide PWM output)
Analog Input                                         Pins6
DC Current per I/O Pin                      40 mA
DC Current for 3.3V Pin                     50 mA
Flash Memory                                      32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM                                                     2 KB (ATmega328)
EEPROM                                               1 KB (ATmega328)
Clock Speed                                           16 MHz
Length                                                    68.6 mm
Width                                                     53.4 mm
Weight                                                   25 g