ARDUINO A000073 (UNO SMD REV3, ATmega328 MCU)
Features of the Arduino UNO
– ATmega 16U2 programmed as a USB to serial converter
– 14 digital I/O pins (6 can be used as Pulse Width Modulation (PWM) Outputs)
– 6 analog inputs
– 16 MHz ceramic resonator
– USB connection
– Power jack
– ICSP header
– Reset button
Description
Arduino UNO Development Boards
3 versions of the Arduino Uno Development Board;
The Uno board is used to develop the AVR ATmega 328 microcontroller and can be powered by either connecting the board to a computer via a USB cable or with an AC to DC adaptor.
Features of the Arduino Uno
– ATmega 16U2 programmed as a USB to serial converter
– 14 digital I/O pins (6 can be used as Pulse Width Modulation (PWM) Outputs)
– 6 analog inputs
– 16 MHz ceramic resonator
– USB connection
– Power jack
– ICSP header
– Reset button
Arduino AVR Development Boards
Ardurino have a range of boards that feature an AVR ATmega microcontroller at the core. Most of the boards feature the 32u4 microcontroller with the Mega boards featuring the ATmega 2560 and the Uno/Nano boards featuring the ATmega328 microcontroller.
Specifications
– Classification: Development Board
– Name: Uno
– Device Core: AVR
– Processor Part Number: ATmega328
– Processor Type: MCU
– Revision: SMD rev.3
You must be logged in to post a review.
Related products
Arduino Nano V3.0 CH340 Improved Atmega328P USB to TTL with USB cable
Overview:
- Microcontroller: Atmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory:32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM:2 KB (ATmega328)
- EEPROM:1 KB (ATmega328)
- Clock Speed:16 MHz
Arduino Pro Mini Atmega168 (3.3V/ 8MHz, 5V/16MHz)
Features:
- 14 Digital input / output ports RX, TX D13, D12
- 8 analog input port A0 to A7
- The TTL level serial transceiver port RX / TX
- 4.6 PWM ports, D3,, D5 , D6, D9, D10, D11
- Using Atmel Atmega168P microcontroller
- Supports serial download (TTL)
- Support for external 5V ~ 12V DC power supply
- Support 9V battery-powered
- clock frequency 16MHz
Package includes:
-
1x Arduino Pro mini Atmega168 module board
- 3x header pin rows
Motor Drive Shield (L293D) for Arduino
- Can drive 4 DC motors or 2 stepper motors or 2 Servo.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection.
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 10V DC.
Raspberry Pi 3 Model B (1GB)
Raspberry Pi Compute Module 3 – 4Gbytes eMMC Flash
Raspberry Pi Calculation Module 3
Raspberry Compute Module 3 is for designers who prefer Raspberry Pi3 functionality but require a smaller form factor (67.6 mm X 31 mm) for their embedded design. These modules are DDR2-SODIMM, mechanically compatible system-on-a-chip (SoM) that includes a BCM2837 processor system-on-a-chip (SoC) with 1 GB of LPDDR2 RAM and 4 GB of eMMC flash. In addition, these modules have an additional input/output (I/O) interface in addition to the Raspberry Pi Model A/B board.
Reviews
There are no reviews yet.