-24%
ESP8266 ESP-05 Remote Serial Port WiFi Transceiver Wireless Module
Original price was: ₨500.00.₨380.00Current price is: ₨380.00.
This ESP8266 ESP-05 Serial WIFI Module is based on ESP8266 SoC. The SOC has Integrated TCP/IP protocol stack which is TTL serial communication interface and its parameters can be set by AT command.
Description
Features:
- Communication interface voltage: 3.3V
- IO Port Package: Inline package, 5P-2.54MM.
- Antenna Type: You should use an external antenna.
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- It is very easy to develop projects with AT command
Application:
- Widely used in networking, smart home project when it is connected to the wifi router.
- It can be used for remote monitoring of home appliances, bedroom temperature and humidity, and controlling home appliances by the mobile phone.
Pin Configuration:
Pinout for the ESP8266 ESP-05 Serial WIFI Module. Operating voltage and current consumption information of the module is included below.
The 5 pin version of the ESP8266 ESP-05 Serial WIFI Module has the following connections on the 5 pin header:
- Reset ā active low reset (apply low voltage level to reset), EXT_RSTB pin 32 on ESP8266 chip
- GND ā GND or 0V of power supply
- Rx ā UART receive pin (3.3V logic level)
- Tx ā UART transmit pin (3.3V logic level)
- Vcc ā 3.3V power supply Vcc connection
There is an aerial or antennae connector at the top left of the board for an external aerial / antennae.
Package Included:
- 1 x ESP8266 ESP-05 Serial WIFI Module
- 1 x 2.4GHz Antenna
- 1 x U.FL ā RP-SMA Cable
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
Arduino Ethernet Shield w/o PoE (Wiznet W5100)
(Get A latest Price)
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet via a standard RJ45 Ethernet jack using the shield.
ESP8266 ESP-12F WiFi module
The module has the ability to run independent of a host controller.
The ESP8266 Serial/UART to WiFi module is a great way to connect your Arduino or other microcontroller projects to a WiFi network.
You can proceed to create your next internet of things (IOT) project with affordable network connectivity by implementing this module into your design.
The ESP8266 has 3.6V max tolerant I/Os so you will need a logic level converter to connect it with higher voltage devices such as Arduino.
The ESP8266 requires 3.3V power so you may need a 3.3V voltage regulator to provide the correct voltage, depending on your setup.
ESP8266 serial WIFI Module ESP-12E (Upgraded Version)
Product Review:
- The ESP-12 module is one of the most complete of the ESP family as it allows you to use a large number of pins. You can program this module to work stand alone with the Arduino IDE or with LUA as Nodemuc.
- It has improved peripheral circuits, four-layer board technology, enhanced impedance matching, and better signal output.
- Whether it is stability or anti-interference ability, PCB antennas have been tested by professional laboratories and are perfectly matched.
- The enhanced version is fully compatible with the previous firmware.
- This cheap and small Wifi transceiver is the perfect solution for home Automation and IoT applications. It can be the replacement for your NRF24L01 it can talk to your Wifi router directly through the UART MCU's.
- The system is equipped with ESP8266 and its features are the energy-saving VoIP can quickly switch between the sleep/wake patterns with low-power operation adaptive radio bias front-end signal processing functions.
- The ESP8266 is a highly integrated chip allowing you to program this module and let it work stand alone with the Arduino IDE or with LUA as Nodemuc.
- The pins are based on ESP-12 and six new IO ports and SPI ports are introduced for easier development and applications.
- Durable, lightweight, low consumption and highly integrated chip.
Raspberry Pi 3 Model B (1GB)
The Raspberry Pi 3 Model B is the latest version of the Raspberry Pi, a tiny credit card size computer. Just add a keyboard, mouse, display, power supply, micro SD card with installed Linux Distribution and you'll have a fully fledged computer that can run applications from word processors and spreadsheets to games.The Raspberry Pi 3 Model B is the latest version of the Raspberry Pi, a tiny credit card size computer. Just add a keyboard, mouse, display, power supply, micro SD card with installed Linux Distribution and you'll have a fully fledged computer that can run applications from word processors and spreadsheets to games.
Reviews
There are no reviews yet.