GY-US42 is low cost, high-quality range range module.

 

Operating voltage 3-5 V, small power consumption, small size, easy installation.

 

Its principle of operation is that the probe emits ultrasonic waves irradiated by the measured object, the probe receives return sound waves, uses the time difference, calculates the actual distance. There are three ways to read the module data, i.e., serial UART (TTL level), IIC, pulse mode pwm,

 

The serial transmission speed is 9600bps and 115200bps, can be configured, there is a continuous, set the output in two ways, you can save the power settings.

 

IIC can modify the internal address to facilitate the IIC bus at the same time accessing several modules. The pulse pwm output is the same as sr04.

 

The module can be adapted to another working environment and connected directly to the microcontroller.

 

When the computer needs USB in the TTL module, a direct connection.

 

The IIC mode can be directly linked to APM, Pixhawk and other flight control.

 

Provides Arduino, 51, STM32 communication procedures of the microcontroller, does not provide circuits and internal microcontroller source.

 

As a result of using the transceiver an ultrasonic probe is built in, the range from the blind area is about 20 cm. Within 20 cm, the range is invalid.

 

Voltage: 3-5 V

Built-in MCU calculates distance

IIC and serial and pwm

Frequency: 15 Hz (full range)

Current: 9mA (VCC = 5V)

Robots

Teaching library equipment

Production tests

Four axes of the aircraft

Anthropometric

Car interior

Pixhawk APM installation