-6%
MQ-135 (Air Quality Control Gas Sensor)
Original price was: ₨550.00.₨500.00Current price is: ₨500.00.
MQ-3 (Alcohol ethanol Gas sensor)
Original price was: ₨400.00.₨360.00Current price is: ₨360.00.
MQ-137 (Ammonia (NH3) Sensor Module)
Original price was: ₨5,500.00.₨5,150.00Current price is: ₨5,150.00.
Sensitive material of MQ-137 gas sensor is SnO2, which acts as lower conductivity in clean air. When the target combustible gas exist, the sensor’s conductivity is more higher along with the gas concentration rising. Please use simple electrocircuit, Convert change of conductivity to correspond output signal of gas concentration.
MQ137 gas sensor has high sensitivity to Ammonia, also to other organic amine. The sensor could be used to detect different gases which are contained Ammonia. It is a low cost module and suitable for different environmental protective application.
Description
Specifications:
- Model No.: MQ137
- Sensor Type: Semiconductor
- Standard Encapsulation: Bakelite (Black Bakelite)
- Detection Gas: Ammonia
- Concentration: 5-500ppm (Ammonia)
CIRCUIT:
- Loop Voltage(Vc): ≤24V DC
- Heater Voltage(VH): 5.0V±0.2V AC or DC
- Load Resistance(RL): Adjustable
CHARACTER:
- Heater Resistance(RH): 31Ω±3Ω Room Temp
- Heater consumption(PH): ≤900mW
- Sensing Resistance(Rs): 2KΩ-15KΩ(in 50ppm NH3)
- Sensitivity(S): Rs(in air)/Rs(5000ppm CH4)≥5
- Slope(α): ≤0.6(R100ppm/R50ppm NH3)
CONDITION:
- Tem. Humidity: 20℃±2℃;65%±5%RH
- Standard test circuit: Vc:5.0V±0.1V; VH: 5.0V±0.1V
- Preheat time: Over 48 hours
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
CJMCU-175 (Digital Temperature Sensor Module)
General Features:
CJMCU-175 Digital Temperature Sensor TMP175 27 Address
Digital output: SMBusTM, two-wire and I2C interface compatibility
Resolution: 9 to 12 digits, user selectable
Wide supply voltage range: 2.7V to 5.5V
TMP175 allowing up to 27 devices on a bus member.
It is a negative temperature desired coefficient thermistor (NTC) and positive temperature coefficient (PTC) for generation
The device provides a typical ±1°C accuracy without calibration or external component signal conditioning .
The on-chip 12-bit analog -to- digital converter (ADC) provides resolution down to 0.0625°C.
HTG3515CH- (Voltage Output Temperature and Humidity Sensor)
Voltage Output Temperature and Humidity Sensor HTG3515CH
Relative Humidity and Temperature Module
SPECIFICATIONS:
- Suitable for small bulk assembly
- Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS
- Full interchangeability. Better than +/-3%RH and +/-0.25°C
- Humidity calibrated within +/- 3% RH @ 55% RH
- Temperature measurement through NTC direct output
Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module’s humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. 
KY-028 -Temperature sensor module (Digital)
Product Features:
- Using the NTC thermistor sensor , good sensitivity.
- The comparator output signal is clean, good waveform , driving ability , more than 15mA.
- Adjust the temperature distribution position detection threshold.
- The working voltage: DC 3.3V-5V.
- The output format : digital switching outputs ( 0 and 1 )
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
Motion Detecting Module- Zilog ePIR
Zilog's ePIR is a fully functional motion-detecting single-board computer (SBC). Combined on this board are a Z8 Encore! XP MCU, and a Murata passive infrared (PIR) sensor, which is shielded by a Fresnel lens. Taking advantage of the processing capabilities of the Z8 MCU, the ePIR uses a powerful new statistical processing method to provide exceptional motion detection performance.
MQ-2 (Smoke sensor-HBO, LPG, Alcohol, Propane, Hydrogen, Methane and Carbon Monoxide)
MQ2 Smoke Gas Sensor Module is a general purpose gas sensor and this Sensor is used to detect the gas leakage of LPG, Smoke, Alcohol, Propane, Hydrogen, Methane and Carbon Monoxide concentrations ranging from 200 to 10000 ppm.
- MQ-2 Gas Sensor Module LPG, Smoke, Alcohol, Propane, Hydrogen, Methane and Carbon Monoxide Detection
- Dual signal output (analog output, and TTL level output)
- The gas, natural gas, city gas, smoke better sensitivity
- With a long service life and reliable stability
- Rapid response and recovery characteristics
Reviews
There are no reviews yet.