MCP3208-CI/P
Microchip MCP3208-CI/P, 12-bit Serial ADC Pseudo Differential, Single Ended Input, 16-Pin PDIP
Description
Specifications
| Attribute | Value |
| Resolution | 12-bit |
| Number of ADCs | 1 |
| Digital Interface Type | Serial (SPI) |
| Mounting Type | Through Hole |
| Number of Input Channels | 8 |
| Sampling Rate | 100ksps |
| Architecture | SAR |
| Typical Single Supply Voltage | 5 V |
| Package Type | PDIP |
| Pin Count | 16 |
| Input Signal Type | Pseudo Differential, Single Ended |
| Input Type | Voltage |
| Integral Nonlinearity Error | ±2LSB |
| Minimum Operating Temperature | -40 °C |
| Width | 6.35mm |
| Dimensions | 19.05 x 6.35 x 3.3mm |
| Length | 19.05mm |
| Height | 3.3mm |
| Maximum Operating Temperature | +125 °C |
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
AT89C2051
Low-voltage, high-performance CMOS 8-bit microcomputer with 2KB of flash programmable and erasable read-only memory. The device is manufactured using Microchip high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. This versatile 8-bit CPU with flash provides a highly flexible and cost-effective solution for many embedded control applications.
ATmega32U4
Microchip Technology ATmega32U4 8-bit Microcontroller (MCU) with USB Controller is a low-power, AVR® RISC-based device featuring 32KB self-programming flash program memory, 2.5KB SRAM, 1KB EEPROM, USB 2.0 full-speed/low speed device module, 12-channel, 10-bit analog-to-digital-converter, and JTAG interface for on-chip-debug. This Microchip device achieves up to 16 MIPS throughput at 16MHz and 2.7 to 5.5V operation. By executing powerful instructions in a single clock cycle, Microchip ATmega32U4 MCU achieves throughputs approaching 1MIPS per MHz, allowing you to optimize power consumption versus processing speed.
PIC16F73
2 PWM 10-bit 25mA sink/source per I/O 2 Capture/Compare Parallel Slave Port
General Parametrics: Program Memory Type: Flash Program Memory Size (KB): 7 CPU Speed (MIPS/DMIPS): 5 SRAM Bytes: 192 Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C1-SSP(SPI/I2C) Capture/Compare/PWM Peripherals: 2 Input Capture, 2 CCP, Timers: 2 x 8-bit, 1 x 16-bit ADC Input: 5 ch, 8-bit Temperature Range (C): -40 to 125 Operating Voltage Range (V): 2 to 5.5 Pin Count: 28
PIC18F25J11
Features:
- 13nA Deep Sleep mode
- 54nA Sleep mode (RAM retention)
- 830nA Real Time Clock & Calendar operation in Sleep modes
- 820nA Watch Dog Timer operation in Sleep modes
- Deep Sleep mode ideal for battery applications
- Peripheral Pin Select for mapping digital peripherals to various I/O for design flexibility
PIC18F47K40
Features:
- PIC18 Core with 83 Instructions, 31 Stack Levels
- Internal 64MHz oscillator
- Operating Voltage Range:- ‘F’ Version (2.3V – 5.5V)- Low Power ‘LF’ variant (1.8V – 3.6V)
- Temperature Range:- Industrial Version (-40C to 85C)- Extended Version (-40C to 125C)
- 128 KB Flash Program Memory with self read/write capability
- 3728 Bytes Data SRAM Memory
PIC18F97J94
Features:
- • nanoWatt XLP technology • Deep sleep current is 60 nA typical • WDT : 650 nA @ 2V typical • RTCC: 650 nA @ 32 Khz, 2V typical • Vbat allows lowest power consumption on back up battery • Multiple, Switchable Clock Modes for Optimum Performance and Power Management • USB 2.0 full speed compliant with on chip transceiver • 480 segments of LCD display. • 60 X 8 commons • Drives LCD panel in Sleep mode • Internal charge pump for LCD • 64Mhz and upto 16 MIPS performance • Four 16 bit timers/counters • Seven Capture/Compare/PWM (CCP) • Three Enhanced Capture/Compare/PWM (ECCP) • Two Master Synchronous Serial Port (MSSP) feature SPI and I2C • Four UART with IrDA • 10/12 bit ADC with 24 channel resolution • Three Rail-to-Rail Enhanced Analog Comparators • Charge Time Measurement Unit (CTMU) for touch and measurements • Operating voltage 2.0V – 3.6V
Reviews
There are no reviews yet.