LM124J
General Purpose Op Amps:
A range of general purpose operational amplifiers from Texas Instruments suitable for a multitude of uses. These devices offer cost-effective performance in non-specialised applications and are available in single, dual and quad configurations. The range includes a large variety of both through hole and SMT packages. Many of the devices in the LM family of op-amps offer low power consumption and are able to operate with single supplies with input common mode voltages that includes ground.
Description
Specifications:
| Attribute | Value |
|---|---|
| Amplifier Type | Low Power |
| Mounting Type | Through Hole |
| Package Type | CDIP |
| Power Supply Type | Single |
| Number of Channels per Chip | 4 |
| Pin Count | 14 |
| Typical Single Supply Voltage | 3 ā 32 V |
| Typical Gain Bandwidth Product | 1MHz |
| Typical Dual Supply Voltage | Ā±1.5 ā Ā±16V |
| Typical Slew Rate | 0.5V/Āµs |
| Maximum Operating Temperature | +85 Ā°C |
| Minimum Operating Temperature | -40 Ā°C |
| Rail to Rail | No |
| Dimensions | 19.94 x 7.62 x 3.56mm |
| Height | 3.56mm |
| Width | 7.62mm |
| Length | 19.94mm |
| Typical Voltage Gain | 100 dB |
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
LM747
The LM747 is a general purpose dual operational amplifier. The two amplifiers share a common bias network and power supply leads. Otherwise, their operation is completely independent.
Additional features of the LM747 are: no latch-up when input common mode range is exceeded, freedom from oscillations, and package flexibility.
The LM747C/LM747E is identical to the LM747/LM747A except that the LM747C/LM747E has its specifications guaranteed over the temperature range from 0Ā°C to +70Ā°Cinstead of -55Ā°C to +125Ā°C
TL072IP
Features:
ā¢ Low Power Consumption ā¢ Wide Common-Mode and Differential Voltage Ranges ā¢ Low Input Bias and Offset Currents ā¢ Output Short-Circuit Protection ā¢ Low Total Harmonic Distortion: 0.003% (Typical) ā¢ Low Noise Vn = 18 nV/āHz (Typical) at f = 1 kHz ā¢ High-Input Impedance: JFET Input Stage ā¢ Internal Frequency Compensation ā¢ Latch-Up-Free Operation ā¢ High Slew Rate: 13 V/Ī¼s (Typical) ā¢ Common-Mode Input Voltage Range Includes VCC+Applications:
ā¢ Motor Integrated Systems: UPS ā¢ Drives and Control Solutions: AC Inverter and VF Drives ā¢ Renewables: Solar Inverters ā¢ Pro Audio Mixers ā¢ DLP Front Projection System ā¢ Oscilloscopes
UPC4574C
DUAL OP-AMP, 5000 uV OFFSET-MAX, 9 MHz BAND WIDTH, PDIP8
General Specifications:
| Supply Voltage (VS) | 5 volts |
| IBIAS | 0.4000 ĆĀµA |
| CMRR | 90 dB |
| Slew Rate | 6 V/ĆĀµs |
| Operating Temperature | -20 to 80 C (-4 to 176 F) |
| Package Type | DIP, 0.300 INCH, PLASTIC, DIP-8 |
| Number of Pins | 8 |
| Number of Devices | 2 |
| Standards | RoHS |
Reviews
There are no reviews yet.