Description:
Infrared obstacle avoidance sensor is designed for a wheeled robot. The obstacle avoidance sensor is distance adjustable. This ambient light sensor is adaptable, high precision, and has a pair of infrared transmitters and receivers. The transmitter tubes emits a certain frequency of infrared when detecting the direction of an obstacle (reflector), and the infrared receiver tube receiver is reflected back when the indicator is lit. Through the circuit, the signal output interface can be detected by means of the potentiometer knob to adjust the distance, and the effective distance from 2 ~ 40cm, working voltage 3.3V-5V, operating voltage range as broad, relatively large fluctuations in the power supply voltage of the situation stable condition and still work for a variety of microcontrollers, Arduino controller, BS2 controller when attached to the robot that can sense changes in their surroundings.
Specifications:
- Working voltage: DC 3.3V-5V
- Working current: ā„ 20mA
- Operating temperature: -10ā~+50ā
- Detection distance: 2-40cm
- IO Interface: 4-wire interfaces (-/+/S/EN)
- Output signal: TTL level (low level there is an obstacle, no obstacle high)
- Adjustment: adjust multi-turn resistance
- Effective angle: 35Ā°
- Size: 28mmĆ23mm
You must be logged in to post a review.
Related products
CJ1WTS562 (Temperature Sensor Module Screw Terminal Connection)
Highlights/Features:
Omron Temperature sensor module is suitable for use with cj1 series programmer controllers These temperature sensor units are classified as digital I/O units when considering I/O allocations and will take digital I/O points from the total allocation for a CJ1M CPU. The number of I/O points is DIP switch selectable as follows; configured for 1 - 3 inputs takes 48 digital I/O points, configured for 4 inputs takes 64 digital I/O points and configured for 5 - 6 inputs takes 96 digital I/O points.
DHT11 (Temperature and Humidity Sensor Module)
DHT11 Temperature and Humidity Sensor Module with LED Power Supply Indicators
Features:
- Can detect surrounding environment of the humidity and temperature
- DHT11 sensor adopts
- Humidity measurement range: 20%-95%, humidity measurement error: +-5%
- Temperature measurement range: 0 -50 ;measurement error: +-2 degrees
- Working voltage 3.3 V-5 V
- Output form: digital output
- Has fixed bolt hole and easy installation
- PCB size: 3.1cm x 1.4cm
GO2Y0A21YK
GO2Y0A21YK
Infrared distance measuring sensor (including dedicated data line)Technical Parameters:
- Model : GP2Y0A21YK (GP2D12 upgrade)
- Voltage: 4.5-5. 5V
- Current: 33-40mA
- Port: Analog
- Detection distance: 10-80cm
- Data line: 3P 20cm
- Wire: 24# American standard line
- Interface: 3P DuPont SVG compatible Arduino sensor expansion board
HTG3515CH- (Voltage Output Temperature and Humidity Sensor)
SPECIFICATIONS:
MAX6675-(Temperature Sensor With Thermocouple Cable)
MAX6675 Module + K Type Thermocouple Sensor:
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple. The data is output in a 12-bit resolution, SPIā¢-compatible, read-only format. This converter resolves temperatures to 0.25Ā°C, allows readings as high as +1024Ā°C, and exhibits thermocouple accuracy of 8LSBs for temperatures ranging from 0Ā°C to +700Ā°C.
Reviews
There are no reviews yet.