Banana Pi BPI-R1(Open source routing development board 4-channel Gigabit Ethernet dual core system)
The banana pi BPI-R1 is a 300Mbps Wireless N Router with both wired and wireless network connections designed specifically for smart home networking use. With 2T2R MIMO Technology and two detachable antennas.
the BPI-R1 is the dual core Android 4.4 product which more better than Linux product. It can run with Android 4.4 smoothly and with 5 Gigabit ethernet port, SATA Socket.also support Linux OS, and Openwrt os.
it can easily run with the game and support 1080P high definition video output.
Description:
BCM53125 Switch chip, meets the requirements of 10/100/1000Mbps for wired network transmission; wireless supports IEEE 802.11 b/g/n 2.4GHz, configures dual external antenna to enhance wireless transmission signal, wireless transmission rate is up to 300Mbps;
banana pie BPI -R1, not only router
1, one button to achieve boot and restart, easy and fast operation;
2, support 720p@30fps and 1080p@30fps video output, take Mali-400MP2 GPU easily achieve 1920 * 1200 high-resolution output, the highest Support 100dB SNR audio output to build home audio and video center without pressure;
3, HDMI output for mainstream HD output devices on the market;
4, freely select SATA1.5/3.0 interface notebook hard drive to expand storage capacity for home cloud center
5, remote download Create free storage space;
6, BPI-R1 makes the perfect integration of computer and router, professional technical support allows you to play the ultimate all-round function
The BPI- R1 is a 300Mbps Wireless N Router with both wired and wireless network connections designed specifically for smart home networking use. With 2T2R MIMO Technology and two detachable antennas, the R1 is the dual core Android 4.2 product which more better than Linux product. It can run with Android4.2.2smoothly and with Gigabit ethernet port, SATA Socket, it can easily run with the game and support 1080P high definition video output
You must be logged in to post a review.
Related products
GLT240128-WB (LCD Graphic RS 232 BLU/WHT)
Raspberry Pi Compute Module 3 – 4Gbytes eMMC Flash
Raspberry Pi Calculation Module 3
Raspberry Compute Module 3 is for designers who prefer Raspberry Pi3 functionality but require a smaller form factor (67.6 mm X 31 mm) for their embedded design. These modules are DDR2-SODIMM, mechanically compatible system-on-a-chip (SoM) that includes a BCM2837 processor system-on-a-chip (SoC) with 1 GB of LPDDR2 RAM and 4 GB of eMMC flash. In addition, these modules have an additional input/output (I/O) interface in addition to the Raspberry Pi Model A/B board.
Simcom- SIM900
WiFly RN-171
- Ultra low power for battery powered applications
- Firmware configurable transmit power: 0dBm to +12dBm
- Hardware interfaces: UART
- Supports Adhoc and infrastructure networking modes
- User programmable GPIO & ADCs
- Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
- Run directly from batteries or regulated power supplies
- Configuration over serial or wireless interface using simple ASCII commands
- Over the air firmware upgrade
- Secure Wi-Fi authentication schemes (WEP/WPA/WPA2)
- Full onboard TCP/IP stack (no external drivers required)
Reviews
There are no reviews yet.