IP67/IP68 Waterproof Threaded SD/TF Card Extension Cable with Super Soft Flat FPC
The IP67/IP68 Waterproof Threaded SD/TF Card Extension Cable is a rugged, panel-mount interface extension designed to extend micro SD/TF card access to the exterior of sealed enclosures. Featuring a weather-resistant threaded bulkhead connector and an ultra-flexible, high-durability FPC (Flexible Printed Circuit) ribbon cable, this adapter allows users to insert or swap memory cards without exposing sensitive internal electronics to moisture, dust, or environmental contaminants.
It is ideal for outdoor IoT devices, security cameras, dashcams, marine equipment, 3D printers, and industrial control panels.
Key Features & Technical Highlights
-
IP67 / IP68 Weatherproof Protection: Features a heavy-duty threaded housing with an integrated rubber sealing washer and a screw-on protective cap to prevent water ingress, dirt, and dust.
-
Super-Soft FPC Ribbon Cable: Constructed with an ultra-thin, highly flexible FPC ribbon cable that easily bends and routes through compact spaces or tight enclosure seals without cracking or breaking.
-
Push-Push / Push-In Socket Mechanism: High-quality push-slot connector ensures smooth card insertion, firm lock-in, and easy ejection.
-
Lossless High-Speed Data Transfer: Engineered with low-impedance traces to support high-speed read/write transfers without signal attenuation, lag, or file corruption.
-
Panel-Mount Threaded Design: Simple hole-mount installation using the included locking nut to secure the interface socket firmly onto any enclosure wall or casing.
-
Slot Longevity: Protects the mainboard’s onboard TF card slot from physical wear and tear caused by frequent insertion and removal cycles.
Technical Specifications
| Parameter | Specification |
| Interface Type | Male TF (Micro SD) to Female TF (Micro SD) Socket |
| Ingress Protection Rating | IP67 / IP68 (when protective cap is secured) |
| Cable Type | Super Soft Flat FPC (Flexible Printed Circuit) |
| Connector Housing | Threaded panel-mount bulkhead with screw cap & washer |
| Mounting Style | Threaded Nut / Panel-Mount Lock |
| Compatibility | Micro SD, Micro SDHC, Micro SDXC cards |
| Operating Temperature | -20°C to +75°C |
Dimensional & Mounting Installation Guide
-
Drill Enclosure Hole: Drill a clearance hole on your project box or chassis panel corresponding to the socket’s thread diameter.
-
Insert Connector: Pass the FPC ribbon cable and threaded socket body through the exterior of the enclosure hole.
-
Secure Lock Nut: Slide the sealing O-ring/washer over the threads inside the panel and tighten the hex locking nut until flush and watertight.
-
Plug into Board: Insert the male end of the FPC cable directly into your single-board computer (SBC), microcontroller, or camera module’s onboard TF slot.
-
Close Protective Cap: When not swapping cards, securely screw the outer rubberized/metal cap over the TF slot to maintain the IP68 seal.
Recommended Applications
-
Outdoor Surveillance & IP Cameras: External storage access for continuous video recording without opening weather-proof housings.
-
IoT & Environmental Monitoring: Data logging enclosures deployed in humid, rain-exposed, or dusty environments.
-
Automotive & Marine Systems: In-vehicle GPS units, dashcams, and marine electronics exposed to vibration and moisture.
-
3D Printers & CNC Controllers: Relocating hard-to-reach mainboard TF slots to the front operating panel.
