UTEK UT-2211 (Port-powered Mini RS-232 to RS-485) 600w Surging Protection
Original price was: ₨2,000.00.₨1,800.00Current price is: ₨1,800.00.
Product Review:
● Standards: RS-232C,RS-485 EIA/TIA
● Connector: RS-232 DB9 female, RS-485 terminal block
● Operating mode: asynchronous half-duplex, differential transmission
● Transmission media: twisted-pair or shielded wire
● Baud rate: 300BPS-115.2KBPS
● Dimension: 58mm×33mm×19.5mm
● Working temperature: -25℃ to 70℃
● Relative humidity: 5% to 95%
● Transmission distance: 1,200m(RS-485), 5m(RS-232)
Product Description:
For communication between PC with different standard serial port and external equipments or intelligent instruments, the standard serial conversion is necessary. This converter is compatible with RS-232C, RS-485 standards. It converts RS-232 signals into balanced differential RS-485 signals. The transmission distance of RS-232 communication can be extended to 1.2km. It adopts a unique “RS-232” charge pump technology to drive the system, and gains power without initializing RS-232 serial port. This converter is with built-in zero delay auto receiving and transmitting conversion and unique I/O circuit auto control data flow direction without any handshake signal (RTS, DTR); this guarantees that there is no need to modify the programming under RS-232 half-duplex mode, it will run smoothly under current software and hardware. The transmission rate is 300-115.2kbps. It can be used between hosts, host and SCM, which building a point to point, point to multipoint long-distance communication networking. It is widely applied in an industrial automation control system, all-in-one card, access control system, parking system, ATM system, bus charging system, canteen ticketing system, attendance system, and toll station system, etc.
Parameters:
Connector & Signal
Dimension:
User Manual:
You must be logged in to post a review.
Related products
CH340G USB To TTL(Serial) Converter For HMI LCD / Raspberry Pi/ Arduino Nano
Product Introduction:
Majors:
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- LED status.
- Dual 3.3V and 5V power output, work with 3.3v and 5v target devices.
- Size: 55mm * 16mm
- Support 32-bit / 64-bit WINDOWS 98 / ME / 2000 / XP / Server 2003 / VISTA / 2008 / Win7 / Win8 server.
- 3 V3 and 5V by short circuit risk selection.
- CH340 module / TTL USB switch / RS232 USB transfer / over PL2303 / STC downloader / 9 Brush board STC official download chip. Perfectly compatible with all series MCU STC will not be because of the different drivers which would cause problems like PL2303 can not download the program.
- Ultra-stable.
High-Speed Mini-HDMI to HDMI Cable – 10 Feet
Industrial Grade UTEK UT-8801 USB to RS-232 Converter Ver 2.0(1-port USB to RS-232 Serial Converter with ESD protection)
Product Introduction:
-
Allows to connect RS232 device to your computer by USB port.
-
FTDI FT232 + 213 chip
-
All 9-wires out
- Real USB 2.0 specification is compliant for faster and steadier data communication.
-
USB bus-powered and no need external power required.
-
Supports Windows 98SE, ME, 2000, XP, Vista, Windows 7, Win 10, Linux v5.0 or above & Mac OS 8.6 or above.
-
cable length 1.5m
Passive RS232 to RS485 communication protocol converter (STM485S)
Overview:
In order to communicate between computers, external devices, and intelligent instruments with different serial port standards, we must first convert the communication signals.This converter is compatible with RS-232C and RS-485 standards. It can convert single-ended PS-232 signals into balanced RS-485 differential signals, and extend the communication distance to 1.2 kilometers. The converter is passive and does not require external power. It uses a special current pump technology to take power from RS-232 signals (RTS, DTR, TXD) without the need to initialize the RS-232 interface in advance.
UTEK UT-203A- Passive Interface Converter Data Communication Adapter (RS232 to RS485/RS422)
Introduction:
- Mini size, DB9 connector, with terminal block
- Standards: RS-232, RS-485, RS-422 TIA/EIA
- Automatic traffic direction control, no need for external flow control signal (RTS)
- Power: port-powered, no need external power connected & serial port initialization, real TXD/RXD/GND communication
- Allows connecting 32 sets networking device
- Transmission distance: 1,200m
- Baud rate: 300ps-115.2kbps
- Transmission media: twisted-pair or shielded cable
- Working mode: asynchronous half-duplex (RS-485) or full-duplex (RS-422), without jumper setting
- Works with all communication software, plug & play
- Dimension: 63×33×17mm
- Operating temperature: -25℃ to 70℃
- Humidity: 5% to 95%
- Supports all operating systems
Reviews
There are no reviews yet.