SDS011 (Laser Dust/Air Quality Sensor Module)
This optical dust sensor can measure the air quality very accurately by measuring air particles or dust based on laser detection. This sensor is supplied with the accompanying cable and USB to serial converter to connect the sensor to a computer if needed.
Specifications:
- Voltage: 4.7 – 5.3V DC (5V DC with <20mV ripple advised)
- Power consumption: 70mA ±10mA (in operation), <4mA (laser and fan sleep mode)
- Measuring range: 0.0-999.9 μg/m3
- PM2.5 and PM10 output
- Lifetime laser diode: up to 8000 hours (with continuous operation*)
Description
Description:
SDS011 is a professional laser dust sensor. Fan mounted on sensor automatically sucks air. Sensor uses laser light scattering principle to measure value of dust particles suspended in the air. Sensor provides high precision and reliable readings of PM2.5 and PM10 values. Any change in environment can be observed almost instantaneously – short respond time below 10 seconds. Sensor in standard mode reports reading with 1 second interval.
There are two ways to communicate with SDS011 sensor:
- digital out (UART)
- PWM signal (one for PM2.5 and one for PM10)
Package includes:
- SDS011 sensor
- cable
- USB-UART converter
Specification:
- Measured values: PM2.5, PM10
- Range: 0 – 999.9 μg /m³
- Supply voltage: 5V (4.7 – 5.3V)
- Power consumption (work): 70mA±10mA
- Power consumption (sleep mode laser & fan): < 4mA
- Storage temperature: -20 to +60C
- Work temperature: -10 to +50C
- Humidity (storage): Max. 90%
- Humidity (work): Max. 70% (condensation of water vapor falsify readings)
- Accuracy:
- 70% for 0.3μm
- 98% for 0.5μm
- Size: 71x70x23 mm
- Certification: CE, FCC, RoHS
Pinout:
- Pin 1 – not connected
- Pin 2 – PM2.5: 0-999μg/m³; PWM output
- Pin 3 – 5V
- Pin 4 – PM10: 0-999 μg/m³; PWM output
- Pin 5 – GND
- Pin 6 – RX UART (TTL) 3.3V
- Pin 7 – TX UART (TTL) 3.3V
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
AMG8834
Temperature Sensor Digital, Infrared (IR) 14-SMD Module
Product Specifications
| Sensor type | Infrared array sensor | |
| Maximum output current | 10mA | |
| Sensing distance | 7m | |
| Switch mode | digital | |
| Installation type | Surface mount | |
| Number of pins | 14 | |
| Maximum supply current | 4.5 mA | |
| size | 11.6 x 8 x 4.3mm | |
| height | 4.3mm | |
| length | 11.6mm | |
| series | Grid-EYE | |
| Maximum working temperature | +80 °C | |
| Maximum operating supply voltage | 5 V DC | |
| Minimum operating temperature | -20 °C | |
| width | 8mm |
DHT11 (Temperature and Humidity Sensor Module)
DHT11 Temperature and Humidity Sensor Module with LED Power Supply Indicators
Features:
- Can detect surrounding environment of the humidity and temperature
- DHT11 sensor adopts
- Humidity measurement range: 20%-95%, humidity measurement error: +-5%
- Temperature measurement range: 0 -50 ;measurement error: +-2 degrees
- Working voltage 3.3 V-5 V
- Output form: digital output
- Has fixed bolt hole and easy installation
- PCB size: 3.1cm x 1.4cm
KY-028 -Temperature sensor module (Digital)
Product Features:
- Using the NTC thermistor sensor , good sensitivity.
- The comparator output signal is clean, good waveform , driving ability , more than 15mA.
- Adjust the temperature distribution position detection threshold.
- The working voltage: DC 3.3V-5V.
- The output format : digital switching outputs ( 0 and 1 )
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
MQ-2 (Smoke sensor-HBO, LPG, Alcohol, Propane, Hydrogen, Methane and Carbon Monoxide)
MQ2 Smoke Gas Sensor Module is a general purpose gas sensor and this Sensor is used to detect the gas leakage of LPG, Smoke, Alcohol, Propane, Hydrogen, Methane and Carbon Monoxide concentrations ranging from 200 to 10000 ppm.
- MQ-2 Gas Sensor Module LPG, Smoke, Alcohol, Propane, Hydrogen, Methane and Carbon Monoxide Detection
- Dual signal output (analog output, and TTL level output)
- The gas, natural gas, city gas, smoke better sensitivity
- With a long service life and reliable stability
- Rapid response and recovery characteristics
MQ-6 LPG Gas Sensor Module
This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 300 to 10000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple; all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.
Reviews
There are no reviews yet.