PIC16F1787
Features:
- Enhanced Mid-Range Core with 49 Instruction, 16 Stack Levels
- Flash Program Memory with self read/write capability
- 256 Bytes of EEPROM
- Internal 32MHz oscillator
- 3 x PSMC (Programmable Switch Mode Controller)- Dedicated 16bit PWM- Digital and/or analog feedback control of PWM frequency- Dead-band control / auto-shutdown & restart
- 4 x Fast Comparators with selectable Voltage Reference
Categories: Electronic Parts, Microchip
Description
Device Overview
Additional Features
-
- Enhanced Mid-Range Core with 49 Instruction, 16 Stack Levels
- Flash Program Memory with self read/write capability
- 256 Bytes of EEPROM
- Internal 32MHz oscillator
- 3 x PSMC (Programmable Switch Mode Controller)- Dedicated 16bit PWM- Digital and/or analog feedback control of PWM frequency- Dead-band control / auto-shutdown & restart
- 4 x Fast Comparators with selectable Voltage Reference
- 3 x Operation Amplifiers (rail-to-rail in and out)
- 14 x 12-bit ADC with Voltage Reference
- 8-bit DAC
- MI2C / SPI / EUSART w/auto baud
- 3 x Compare-Capture-PWM
- Two 8-bit Timers (TMR0/TMR2)
- One 16-bit Timer (TMR1)
- Extended Watchdog Timer (EWDT)
- Wide Operating Voltage Range:- āFā Version (2.3V ā 5.5V)- Low Power āLFā variant (1.8V ā 3.6V)
- 25mA Source/Sink current I/O
- Enhanced Power-On/Off-Reset
- Brown-Out Reset (BOR)
- In Circuit Serial Programming (ICSP)
General Parametrics:
Program Memory Type: Flash
Program Memory Size (KB): 14
CPU Speed (MIPS/DMIPS): 8
SRAM Bytes: 1,024
Data EEPROM/HEF (bytes): 256
Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)
Capture/Compare/PWM Peripherals: 3 Input Capture, 3 CCP,
Timers: 2 x 8-bit, 1 x 16-bit
ADC Input: 15 ch, 12-bit
Number of Comparators: 4
Temperature Range (C): -40 to 125
Operating Voltage Range (V): 1.8 to 5.5
Pin Count: 40
Low Power: Yes
Reviews (0)
Be the first to review “PIC16F1787” Cancel reply
You must be logged in to post a review.
Shipping & Delivery
Related products
ATmega32U4
Microchip Technology ATmega32U4 8-bit Microcontroller (MCU) with USB Controller is a low-power, AVRĀ® RISC-based device featuring 32KB self-programming flash program memory, 2.5KB SRAM, 1KB EEPROM, USB 2.0 full-speed/low speed device module, 12-channel, 10-bit analog-to-digital-converter, and JTAG interface for on-chip-debug. This Microchip device achieves up to 16 MIPS throughput at 16MHz and 2.7 to 5.5V operation. By executing powerful instructions in a single clock cycle, Microchip ATmega32U4 MCU achieves throughputs approaching 1MIPS per MHz, allowing you to optimize power consumption versus processing speed.
MCP3008-I/P
PIC16F18877
Features:
- Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
- Adjustable Internal Oscillator (up to 32MHz)
- 2x 10-bit PWMs
- 5x Capture, Compare, PWM (CCP)
- Complementary Waveform Generator (CWG)
- Numerically Controlled Oscillator (NCO)
PIC16F628A
PIC16F877A
PIC16F877A
This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PICĀ® architecture into an 40 package and is upwards compatible with the PIC16C5X, PIC12CXXX and PIC16C7X devices. The PIC16F877A features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 8 channels of 10-bit Analog-to-Digital (A/D) converter, 2 capture/compare/PWM functions, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPIā¢) or the 2-wire Inter-Integrated Circuit (IĀ²Cā¢) bus and a Universal Asynchronous Receiver Transmitter (USART).PIC18F47K40
Features:
- PIC18 Core with 83 Instructions, 31 Stack Levels
- Internal 64MHz oscillator
- Operating Voltage Range:- āFā Version (2.3V ā 5.5V)- Low Power āLFā variant (1.8V ā 3.6V)
- Temperature Range:- Industrial Version (-40C to 85C)- Extended Version (-40C to 125C)
- 128 KB Flash Program Memory with self read/write capability
- 3728 Bytes Data SRAM Memory
Reviews
There are no reviews yet.