I2C-TMP (Board Mount Temperature Sensors)
Board Mount Temperature Sensors I2C 12-BIT DIGITAL TEMPERATURE SENSOR
Product Description:
The I2C-TMP board is a 6-pin CMOS 12-bit digital temperature sensor device using I2C bus. There are no external components required. Only two signal lines SDA and SCL plus supply voltage and ground are required to be connected. This makes it perfect for embedded systems that require temperature measurement.
This board features innovations that set it apart from other temperature sensor module. Innovations feature like on-board I2C address jumpers, pull-up resistors, and power LED. The module can be quickly connected directly on to the breadboard. The board is small and compact in size 0.70 x 0.60 inches.
The I2C-TMP is designed base on TMP175 IC. It is digital temperature sensors that are optimal for thermal management and thermal protection applications. The device is specified over a temperature range of −40C to +125C.
The sensing device is the chip itself. Thermal paths run through the package leads as well as the plastic package. The lower thermal resistance of metal causes the leads to provide the primary thermal path.
A jumper pins vary the fixed I2C address and allow up to 27 devices to share the same I2C bus.
Features:
• Resolution: 9- to 12-bit, user-selectable
• Accuracy: +/- 1.5C (max) from -25C to +85C
+/- 2.0C (max) from -40C to +125C
• Stand alone module, no external components required
• On-board I2C address jumpers, pull-up resistors and power LED
• Decoupling supply voltage
• Design easy for breadboard
• High quality double sided PCB
• All SMT components
• Small and compact in size 1.50 x 2.05 inches
• Dual row 0.6” width, 0.1” pitch header pins
• Flexible operating power supply voltage range of 2.7V to 5.5V
• Suitable for 3.3V or 5.0V microcontroller
You must be logged in to post a review.
Related products
AMG8834
Temperature Sensor Digital, Infrared (IR) 14-SMD Module
Product Specifications
| Sensor type | Infrared array sensor | |
| Maximum output current | 10mA | |
| Sensing distance | 7m | |
| Switch mode | digital | |
| Installation type | Surface mount | |
| Number of pins | 14 | |
| Maximum supply current | 4.5 mA | |
| size | 11.6 x 8 x 4.3mm | |
| height | 4.3mm | |
| length | 11.6mm | |
| series | Grid-EYE | |
| Maximum working temperature | +80 °C | |
| Maximum operating supply voltage | 5 V DC | |
| Minimum operating temperature | -20 °C | |
| width | 8mm |
CJMCU-175 (Digital Temperature Sensor Module)
General Features:
Motion Detecting Module- Zilog ePIR
MQ-7 (Carbon Monoxide Gas Sensor Module)
SHT31 (Digital Temperature and Humidity Sensor Module)
- Highly reliable, accurate and quick response time
- I2C interface
- Well calibrated, linearized, compensated for digital output
- Highly abstracted development library
- Input voltage (VCC): 3.3 volts or 5 volts
- I/O Logic Level : 3.3 volts or 5 volts based on VCC
- Operating Current : 100 μA
- Operating Temperature : -40–125 ℃
- Temperature Sensor Range : -40–125 ℃, with ±0.3°C accuracy
- Humidity Sensor Range : 0% - 100%(Relative Humidity), with ±2% accuracy
- Sensor Chip : SHT31
- I2C
TCS34725 (RGB Color Sensor with IR filter and White LED)
TMP006 (Contact-less Infrared Temperature Measurement)
Features:
- 20mm x 20mm (board w/o headers)
- Uses I2C 7-bit addresses between 0x40 and 0x47, selectable with jumpers
- Interface Type : I2C Arduino driver module
Reviews
There are no reviews yet.