GY-US42 (ULTRASONIC SENSOR I2CXL-MAXSONAR)
Voltage: 3-5 V
Built-in MCU calculates distance
IIC and serial and pwm
Frequency: 15 Hz (full range)
Current: 9mA (VCC = 5V)
Application:
Robots
Teaching library equipment
Production tests
Four axes of the aircraft
Anthropometric
Car interior
Pixhawk APM installation
Description
Description:
GY-US42 is low cost, high-quality range range module.
Operating voltage 3-5 V, small power consumption, small size, easy installation.
Its principle of operation is that the probe emits ultrasonic waves irradiated by the measured object, the probe receives return sound waves, uses the time difference, calculates the actual distance. There are three ways to read the module data, i.e., serial UART (TTL level), IIC, pulse mode pwm,
The serial transmission speed is 9600bps and 115200bps, can be configured, there is a continuous, set the output in two ways, you can save the power settings.
IIC can modify the internal address to facilitate the IIC bus at the same time accessing several modules. The pulse pwm output is the same as sr04.
The module can be adapted to another working environment and connected directly to the microcontroller.
When the computer needs USB in the TTL module, a direct connection.
The IIC mode can be directly linked to APM, Pixhawk and other flight control.
Provides Arduino, 51, STM32 communication procedures of the microcontroller, does not provide circuits and internal microcontroller source.
As a result of using the transceiver an ultrasonic probe is built in, the range from the blind area is about 20 cm. Within 20 cm, the range is invalid.
Voltage: 3-5 V
Built-in MCU calculates distance
IIC and serial and pwm
Frequency: 15 Hz (full range)
Current: 9mA (VCC = 5V)
Application:
Robots
Teaching library equipment
Production tests
Four axes of the aircraft
Anthropometric
Car interior
Pixhawk APM installation
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
HTG3515CH- (Voltage Output Temperature and Humidity Sensor)
Voltage Output Temperature and Humidity Sensor HTG3515CH
Relative Humidity and Temperature Module
SPECIFICATIONS:
- Suitable for small bulk assembly
- Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS
- Full interchangeability. Better than +/-3%RH and +/-0.25Ā°C
- Humidity calibrated within +/- 3% RH @ 55% RH
- Temperature measurement through NTC direct output
Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the moduleās humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. 
KY-028 -Temperature sensor module (Digital)
Product Features:
- Using the NTC thermistor sensor , good sensitivity.
- The comparator output signal is clean, good waveform , driving ability , more than 15mA.
- Adjust the temperature distribution position detection threshold.
- The working voltage: DC 3.3V-5V.
- The output format : digital switching outputs ( 0 and 1 )
- A fixed bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
Motion Detecting Module- Zilog ePIR
Zilog's ePIR is a fully functional motion-detecting single-board computer (SBC). Combined on this board are a Z8 Encore! XP MCU, and a Murata passive infrared (PIR) sensor, which is shielded by a Fresnel lens. Taking advantage of the processing capabilities of the Z8 MCU, the ePIR uses a powerful new statistical processing method to provide exceptional motion detection performance.
MQ-7 (Carbon Monoxide Gas Sensor Module)
MQ-7 Carbon Monoxide Gas Sensor Module is used to detect Carbon Monoxide (CO) concentration, it can detect CO-gas concentrations anywhere from 20 to 2000ppm. This sensor has a high sensitivity and fast response time. The module outputs a voltage from 0 to 5V relative to the CO concentration. The sensor can operate at temperatures from -10 to 50Ā°C and consumes less than 150 mA at 5 V.
SHT31 (Digital Temperature and Humidity Sensor Module)
General Features:
- Highly reliable, accurate and quick response time
- I2C interface
- Well calibrated, linearized, compensated for digital output
- Highly abstracted development library
- Input voltage (VCC): 3.3 volts or 5 volts
- I/O Logic Level : 3.3 volts or 5 volts based on VCC
- Operating Current : 100 Ī¼A
- Operating Temperature : -40ā125 ā
- Temperature Sensor Range : -40ā125 ā, with Ā±0.3Ā°C accuracy
- Humidity Sensor Range : 0% - 100%(Relative Humidity), with Ā±2% accuracy
- Sensor Chip : SHT31
- I2C
Reviews
There are no reviews yet.