ELET114A Bluetooth dual-mode transmission serial port BT4.0 Module For iOS and Android
The integrated MCU module and Bluetooth chip, support UART, SPI, I2C and interfaces I2S, including 4 PWM ports and 6 12bit ADC channels, with high integration, low cost, low power consumption, excellent performance of Bluetooth radio.
Power Supply and Inetrfacesļ¼
- Voltage: 3.3V
- Current: I is less than 20mA (mean)
- Host interface: UART
- Audio interface: I2S, PCM
- Other interfaces: I2C, SPI
Characteristicļ¼
The integrated MCU module and Bluetooth chip, support UART, SPI, I2C and I2S interfaces,
including 4 PWM ports and 6 12bit ADC channels, with high integration, low cost,
low power consumption, excellent performance of Bluetooth radio
Featureļ¼
- Support BT3.0+EDR and BT4.0 (BLE) Dual – Mode, two models can work at the same time.
- Complete Bluetooth , data transmission solution.
- Optional PIO control.
- Standard HCI port (UART support flow control).
- The module can be used as the SMD patch process, the half hole pin.
- ROHS process, support CE, FCC, BQB, SIG certification.
- From the device, the main set needs to be customized development. Custom sleep mode ultra low power.
- Built in 2.4G PCB RF antenna, the user does not need to do antenna debugging.
- The module is fully integrated with XTAL, LPO and other peripheral components. The design is simple and the cost is low.
- Adaptive frequency hopping technology, high-performance wireless transceiver system, in the open area, sending and receiving distance can reach 50-100 meters.
- Suitable for serial transparent transmission wireless alternatives, without the need to understand the specific development of Bluetooth protocol.
Application field:
This module is mainly used in the field of short distance wireless data transmission, wireless terminal machine, and can conveniently PC intelligent mobile phone and so on Bluetooth devices connected, can also realize the data exchange between the two modules, avoid complicated cable connection and space constraints, you can directly replace the serial line.
- The Bluetooth and RS232 (RS483) serial data conversion
- The Bluetooth wireless data transmission
- The medical and industrial equipment remote control
- The Bluetooth printer, bar-code scanning equipment
- The POS system, wireless keyboard and mouse
- The industrial remote control and telemetry
- The indoor positioning and alarm
- The wireless meter reading system, wireless data acquisition
- The building automation, security equipment, wireless monitoring, access control system
- The intelligent Home Furnishing, industrial control
- The auto test equipment
- The wireless LED display system, touch screen devices
- The Bluetooth joystick, gamepad Bluetooth, Bluetooth remote control, remote control toys
You must be logged in to post a review.
Related products
BK8000L Wireless Bluetooth Stereo Audio Module (AT Commands SPP DIY Bluetooth Speaker Amplifier)
BLE LINK BLUETOOTH 4.0
ESP-WROOM-32 Development Board | 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor With built-in Antenna
- 2.4GHz Dual-Mode WiFi + Bluetooth Development Board
- Ultra-Low power consumption works perfectly with the Arduino IDE
- Support LWIP protocol, Freertos
- SupportThree Modes: AP, STA, and AP+STA
- ESP32 is safe, reliable, and scalable to a variety of applications
- 30Pin ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters
GPS module SR-87 (ProGin)
SIMCom- SIM900-DS
U-BLOX NEO-6M module (GY-GPS6MV2)
- 1 ā u-blox NEO-6M GY-GPS6MV2 GPS module with on board EEPROM
- 1 ā GPS antenna
- 1 ā 1x4 male header
WiFly RN-171
- Ultra low power for battery powered applications
- Firmware configurable transmit power: 0dBm to +12dBm
- Hardware interfaces: UART
- Supports Adhoc and infrastructure networking modes
- User programmable GPIO & ADCs
- Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
- Run directly from batteries or regulated power supplies
- Configuration over serial or wireless interface using simple ASCII commands
- Over the air firmware upgrade
- Secure Wi-Fi authentication schemes (WEP/WPA/WPA2)
- Full onboard TCP/IP stack (no external drivers required)
XBee 1mW Wire Antenna
Description:
- 3.3V @ 50mA
- 250kbps Max data rate
- 1mW output (+0dBm)
- 300ft (100m) range
- Wire antenna
- Fully FCC certified
- 6 10-bit ADC input pins
- 8 digital IO pins
- 128-bit encryption
- Local or over-air configuration
- AT or API command set
Reviews
There are no reviews yet.