Back to products
Pressure Sensors NSK-BE009I-U108
Original price was: ₨34,500.00.₨30,500.00Current price is: ₨30,500.00.
ATmega32U4
Microchip Technology ATmega32U4 8-bit Microcontroller (MCU) with USB Controller is a low-power, AVR® RISC-based device featuring 32KB self-programming flash program memory, 2.5KB SRAM, 1KB EEPROM, USB 2.0 full-speed/low speed device module, 12-channel, 10-bit analog-to-digital-converter, and JTAG interface for on-chip-debug. This Microchip device achieves up to 16 MIPS throughput at 16MHz and 2.7 to 5.5V operation. By executing powerful instructions in a single clock cycle, Microchip ATmega32U4 MCU achieves throughputs approaching 1MIPS per MHz, allowing you to optimize power consumption versus processing speed.
Description
FEATURES
- High Performance, Low Power AVR® 8-Bit Microcontroller
- Advanced RISC Architecture
- 135 Powerful Instructions Most Single Clock Cycle Execution
- 32 x 8 General Purpose Working Registers
- Fully Static Operation
- Up to 16 MIPS Throughput at 16 MHz
- On-Chip 2-cycle Multiplier
- Non-volatile Program and Data Memories
- 32K Bytes of In-System Self-Programmable Flash
- 2.5K Bytes Internal SRAM
- 1K Bytes Internal EEPROM
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
- Data retention: 20 years at 85°C/ 100 years at 25°C(1)
- Optional Boot Code Section with Independent Lock Bits
- In-System Programming by On-chip Boot Program
- True Read-While-Write Operation
- All supplied parts are preprogramed with a default USB bootloader
- Programming Lock for Software Security
- JTAG (IEEE std. 1149.1 compliant) Interface
- Boundary-scan Capabilities According to the JTAG Standard
- Extensive On-chip Debug Support
- Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
- USB 2.0 Full-speed/Low Speed Device Module with Interrupt on Transfer Completion
- Complies fully with Universal Serial Bus Specification Rev 2.0
- Supports data transfer rates up to 12 Mbit/s and 1.5 Mbit/s
- Endpoint 0 for Control Transfers: up to 64-bytes
- 6 Programmable Endpoints with IN or Out Directions and with Bulk, Interrupt or Isochronous Transfers
- Configurable Endpoints size up to 256 bytes in double bank mode
APPLICATIONS
- Industrial Automation
- Sensors
- PC Peripherals
- PC Accessories
- Small I/O Devices
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
ATmega88PA
General Parametrics:
Program Memory Type: Flash
Program Memory Size (KB): 8
CPU Speed (MIPS/DMIPS): 20
SRAM Bytes: 1,024
Data EEPROM/HEF (bytes): 512
Digital Communication Peripherals: 1-UART, 2-SPI, 1-I2C
Capture/Compare/PWM Peripherals: 1 Input Capture, 1 CCP, 6PWM
Timers: 2 x 8-bit, 1 x 16-bit
Number of Comparators:1
Temperature Range (C): -40 to 85
Operating Voltage Range (V): 1.8 to 5.5
Pin Count: 32
Low Power: Yes
PIC16F15355-I/SS
16F Microcontroller IC 8-Bit 32MHz 14KB (8K x 14) FLASH 28-SSOP
| Product Attributes | |
| Part Status | Active |
| Core Processor | PIC |
| Core Size | 8-Bit |
| Speed | 32MHz |
| Connectivity | I²C, LINbus, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Number of I/O | 25 |
| Program Memory Size | 14KB (8K x 14) |
| Program Memory Type | FLASH |
| EEPROM Size | 224 x 8 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3 V ~ 5.5 V |
| Data Converters | A/D 24x10b, D/A 1x5b |
| Oscillator Type | Internal |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package / Case | 28-SSOP (0.209", 5.30mm Width) |
| Supplier Device Package | 28-SSOP |
PIC16F18877
Features:
- Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
- Adjustable Internal Oscillator (up to 32MHz)
- 2x 10-bit PWMs
- 5x Capture, Compare, PWM (CCP)
- Complementary Waveform Generator (CWG)
- Numerically Controlled Oscillator (NCO)
PIC18F25J11
Features:
- 13nA Deep Sleep mode
- 54nA Sleep mode (RAM retention)
- 830nA Real Time Clock & Calendar operation in Sleep modes
- 820nA Watch Dog Timer operation in Sleep modes
- Deep Sleep mode ideal for battery applications
- Peripheral Pin Select for mapping digital peripherals to various I/O for design flexibility
PIC18F47K40
Features:
- PIC18 Core with 83 Instructions, 31 Stack Levels
- Internal 64MHz oscillator
- Operating Voltage Range:- ‘F’ Version (2.3V – 5.5V)- Low Power ‘LF’ variant (1.8V – 3.6V)
- Temperature Range:- Industrial Version (-40C to 85C)- Extended Version (-40C to 125C)
- 128 KB Flash Program Memory with self read/write capability
- 3728 Bytes Data SRAM Memory
Reviews
There are no reviews yet.